SOLD - 240mm Integral full tang Euro Chef.
SKU:
£540.00
£540.00
Unavailable
per item
This was forged a while a go and I finally got round to finish it. The steel is silver steel, very high carbon, around 1.2C , the steel is very hard and whilst fine the edge characteristics are toothy..... the advantage is you get incredible edge retention from this steel, whist being easy to maintain. I decided to compliment the hard wearing nature of this knife with some Kevlar, brass strand Micarta ... "Lightning flash" The handle is finally finished with ca glue and buffed out, no strands will poke through the surface..... There are 3 fully riveted nickel silver pins in the handle making this knife very very tough proposition. This is a mid thickness knife, yet very little flex and very thin geometry.
This is my take on a Euro Chef knife, but with the finest steel , heat treatment and my geometry:)
Knife specifications
Blade length - 241mm
Height 50mm
thickness over heel spine 3mm, full distal taper,
Geometry, broken lower bevel for release and very low friction cut.
Hardness is 64/65hrc.
Handle full tang integral , coke bottle shape...
Weight 295g, balance on chill
This is my take on a Euro Chef knife, but with the finest steel , heat treatment and my geometry:)
Knife specifications
Blade length - 241mm
Height 50mm
thickness over heel spine 3mm, full distal taper,
Geometry, broken lower bevel for release and very low friction cut.
Hardness is 64/65hrc.
Handle full tang integral , coke bottle shape...
Weight 295g, balance on chill
Sold out