Available- Forged Geometry Super High Grade, 240mm Gyuto,
SKU:
£575.00
£575.00
per item
Well, this is a bit special, this has a few upgrades over a standard forged geometry knife.
Firstly the blade is laminated with an sc145 core and pure nickel to retain the huge amount of carbon. After forging the geometry perfectly smooth and even, hammer texture was added giving an amazing finish when polished and accentuating the geometry even further. To bring out the pure nickel next to the core the bevels were fully stone finished to ensure perfect performance, then hand finished and etched lightly.
The handle is also special, all stabilised materials and a fantastically comfortable chunky D handle, compliments the amazing spalted hornbeam.
If you would like to order a leather saya to go with this fantastic combination, one can be made for £40 on top of your order, ask on checkout.
Specifications
BL 244mm
Height - 56mm
Spine thickness entering handle - 4.8mm. over heel - 4mm - halfway - 2.8 - 10mm from tip 0.6mm
Geometry - Knife is retains weight and zero flex but forged considerably thinner down the centre of the knife, allowing a much thinner lower compound bevel, its the perfect balance of release with very little wedge, with the weight to help it fall through food, tip is very thin. Knife is about 1.8mm thick at the top of the lower convex bevel 16mm up from the edge.
Weight - 244g
Balance - heel plus 15mm
Handle Chunk D, came out perfect and soon comfortable for right hand use. Wood is stab ebony, stab hornbeam and a bright red composite spacer.
Firstly the blade is laminated with an sc145 core and pure nickel to retain the huge amount of carbon. After forging the geometry perfectly smooth and even, hammer texture was added giving an amazing finish when polished and accentuating the geometry even further. To bring out the pure nickel next to the core the bevels were fully stone finished to ensure perfect performance, then hand finished and etched lightly.
The handle is also special, all stabilised materials and a fantastically comfortable chunky D handle, compliments the amazing spalted hornbeam.
If you would like to order a leather saya to go with this fantastic combination, one can be made for £40 on top of your order, ask on checkout.
Specifications
BL 244mm
Height - 56mm
Spine thickness entering handle - 4.8mm. over heel - 4mm - halfway - 2.8 - 10mm from tip 0.6mm
Geometry - Knife is retains weight and zero flex but forged considerably thinner down the centre of the knife, allowing a much thinner lower compound bevel, its the perfect balance of release with very little wedge, with the weight to help it fall through food, tip is very thin. Knife is about 1.8mm thick at the top of the lower convex bevel 16mm up from the edge.
Weight - 244g
Balance - heel plus 15mm
Handle Chunk D, came out perfect and soon comfortable for right hand use. Wood is stab ebony, stab hornbeam and a bright red composite spacer.
Sold out